Description
NRG Ops is happy to announce a Bluetooth flex fuel system for the 4B11T platform!
This kit is 100% plug and play, so installation is a breeze. With the ability for your ECU to see the ethanol content in the fuel and your ability to monitor it via your smart device, never worry about filling up again.
This kit is 100% plug and play, so installation is a breeze. With the ability for your ECU to see the ethanol content in the fuel and your ability to monitor it via your smart device, never worry about filling up again.
Includes:
- Fuel-It! flex fuel module with built-in Bluetooth.
- Plug and play wiring for 4B11T equipped Evo X’s and Ralliarts.
- OE GM/Continental flex fuel ethanol content sensor.
- Black Nylon Braided fuel line.
- Push on EFI fittings.
Features:
- Truly PnP. No cutting, soldering, splicing, etc.
*Innovate/Zeitronix gauges are NOT plug-and-play and require wiring and mounting.* - Installed in engine bay, not near fuel tank
- Compatible with Tephra V3 ECU Roms.
- Ethanol content can be viewed via the Fuel-It! app for both iPhone and Android devices or logged via any Mode23 device.
Output voltage range: 0-5v (0% ethanol to 100% ethanol)
App can be found here:
–Android
–iOS
NOTE: Instructions provided are for USDM version of kit. AUDM version slightly different due to differences with harnesses on vehicles. Install module fuel line in engien bay. Then connect ground to negative terminal of battery or in the kick panel, power from the fuse box, and then the single pin to the ECU (Pin 112).
